Sherwin-Williams ProVisions line of Aero-Green Specialty Cleaners, manufactured by Hi-Lite Solutions, gives you the tools to safely clean and prepare almost any surface for a finished coat of paint. Sherwin-Williams understands how important it is to properly clean and prepare a surface prior to painting to ensure the best bond between the coating and the surface. The vast majority of coating failures can be directly attributed to inadequate surface preparation, which affects coating adhesion.

It’s just as important to Sherwin-Williams that the products they sell are environmentally sound, cost effective and safe solutions that reduce any negative impact on the environment, while providing equal or better performance than their traditional toxic counterparts. So how do you get the best finish possible, and still ‘Go Green’? It’s simple … prep the job with Aero-Green’s highly effective, eco-friendly, water based paint prep cleaners and degreasers listed below, and finish the job with Sherwin-Williams products.

4110 Paint Prep Cleaner
In order to Go Green, and reduce VOC’s in the paint industry, solvent based paints are rapidly being replaced by water-based paints.  Aero-Green’s 4110 Paint Prep Cleaner, the first non-toxic, water-based product on the market designed to safely clean and prepare all surfaces for paint, works better than traditional toxic cleaners with the industry’s new paints. Because the paint and Aero-Green 4110 both use water based technology, there are very compatible, so the paint bonds better to the surface, leaving little or no imperfections in the painted surface. When used alone or in combination with the other Aero-Green products in the Sherwin Williams ProVisions line, cleaning the surface with Aero-Green 4110 is the final and most important step to ensure a professional flawless finish.
Download Data Sheet    l   Download MSDS

4130 High Pressure Cleaner Degreaser
Aero-Green 4130 High Pressure Cleaner Degreaser, is a concentrated cleaner used to prepare large surfaces such as exterior buildings, interior walls, ceilings, floors and stairways, for paint. Aero-Green 4130, when used with both cold and heated high pressure washers, quickly breaks down and safely removes dirt, concrete dust, exhaust soot, oils, greases, hydraulic fluids and fuel residue, as well as a variety of soils, leaving a residue free clean surface ready to be painted. It’s recommended that after using Aero-Green 4130, you give metal doors, window frames and railings, a quick wipe with Aero-Green 4110 before painting.

Download Data Sheet   l   Download MSDS






4160 Parts Washer Degreaser
Aero-Green 4160 Parts Washer Degreaser is designed to provide superior cleaning of mechanical parts, engine support equipment and automotive components that are to be painted. Aero-Green 4160 is mixed with water in a dip or immersion tank, ultrasonic tank, or in-line system, then the pieces to be painted are cleaned in the solution, and set aside until it’s time to paint. The solution can last for weeks depending on the frequency of use and the size of the tank. Aero-Green 4160 contains a rust inhibitor, so that the part can be worked on or shelved for some time before painting without any corrosion forming on the surface. The part would get a final wipe down with Aero-Green 4110 to remove any surface dust or dirt right before it’s painted.

Download Data Sheet   l   Download MSDS

4175 Ink and Coating Remover
Aero-Green 4175 Ink and Coating Remover has a special additive in its non-toxic, water soluble formula that makes it very effective in removing tars; solvent, oil and water based inks; and adhesives on equipment, machines and floors that are to be painted.  Before cleaning the object to be painted with Aero-Green 4175, use Aero-Green 4110 Paint Prep Cleaner to remove all the oils, dirts and greases on the surface first. The tars, inks and adhesives left behind are then cleaned away using Aero-Green 4175. After that, clean the piece again with Aero-Green 4110 to remove any residue left behind from Aero-Green 4175 to ensure that the paint properly adheres to the surface.

Download Data Sheet   l   Download MSDS

AC-10 Rust Remover and Metal Prep
Aero-Green AC-10 Rust Remover and Metal Prep is specially formulated to remove rust or any type of oxidation on the surface of a metal part prior to painting. Depending on the surface to be cleaned, this clear, odorless, innovative product can be diluted with water and brushed on, sprayed on, or used in cold or heated dip tanks for the best results. Aero-Green AC-10 is also used when a part has been welded prior to painting. The welded area of the part is wiped down with Aero-Green AC-10 to prep the metal. After removing rust or prepping the metal with Aero-Green AC-10, the part is given a final wipe down with Aero-Green 4110 prior to painting.

Download Data Sheet    l   Download MSDS